manualshive.com logo in svg

Zida 6mlx, User Manual

Share
Download
Zida 6mlx User Manual Download Page 22

Motherboard Installation

Page 20

Display Mode At Add-On ROM Init

This option specifies the system display mode that is set at the time that
AMIBIOS POST initializes an optional option ROM. The settings are:

Setting

Description

Force

BIOS

The display mode currently being used by
AMIBIOS is used.

Keep

Current

The current display mode is used.

Floppy Access Control

This option specifies the read/write access that is set when booting from a
floppy drive. The settings are Read/Write or Read-Only. The Optimal and Fail-
Safe default settings are Read/Write.

Hard Disk Access Control

This option specifies the read/write access that is set when booting from a hard
disk drive. The settings are Read/Write or Read-Only. The Optimal and Fail-
Safe default settings are Read/Write.

S.M.A.R.T. For Hard Disks

Set this option to Enabled to permit AMIBIOS to use the SMART (System Management
System Management and Reporting Technologies) protocol for reporting server system
information over a network. The settings are Enabled or Disabled. The Optimal and Fail-

Safe default settings are Disabled

.

Typematic Rate (Chars/Sec)

Typematic Rate sets the rate at which characters on the screen repeat when a
key is pressed and held down. The settings are Fast or Slow.

Boot Up CPU Speed

This option lets you specify the CPU speed at system boot. The settings are Low or High. The
Optimal and Fail-Safe default settings are High.

Cont’d

Summary of Contents for 6mlx
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands