Pairing/Deleting Accessory
The included accessories have been paired with the control panel by default, if you want
to pair new accessories, please follow these instructions:
Pair New Remote Control and Sensor
Enter the disarm password (default: 1234) and then press the
[
@
]
button on the
control panel and trigger the sensors once.
Pair New Wireless Siren
Siren is sold separately.
1. Make siren enter pairing state (please refer to relevant user manual).
2. Press
[
Q
]
or
[
{£)
]
on the control panel to send out a pairing signal to the siren.
When a beep is heard from the siren, the siren is paired successfully. If two beeps are
heard, the siren has already been paired before.
If a wireless siren is paired, you can turn on or off the arm/disarm tone by sending
“63701” or
“63700” to the control panel
Delete Sensors
Send SMS with content
“21” to the control panel, then you will receive an SMS to
confrm the successful deletion of sensors.
Send SMS with content
“22” to the control panel, then you will receive an SMS to
confrm the successful deletion of RFID tags. Yo u can delete RFID tags through App as
well.
Send SMS with content
“23” to the control panel, then you will receive an SMS to
confrm the successful deletion of remote controls.
Delete Wireless Siren
Press and hold the pair button of the wireless siren; the deletion is succeeded when two
beeps are heard from the wireless siren.
When a beep is heard from the control panel, the sensor is paired successfully. If two
beeps are heard, the sensor has already been paired before.
Note:
To pair other sensors, please refer to the related user manuals.
21
22
