Ziamatic Corp.
10 West College Avenue, P.O. Box 337, Yardley, PA 19067-0587 • (215) 493-3618 • FAX: (215) 493-1401
*ZICO is a registered trademark for fire, safety and marine products made by Ziamatic Corp
.
Copyright Ziamatic Corp. 5-16
www.ziamatic.com
TOLL FREE: 800-711-3473
Page 4
Assembling the Saw Blade Holder
1.
See Figure 2. Plan out spacer location based on the diameter of the saw blade you'd like to store. If more
than one storage slot is going to be used, plan to have the blades in a tiered arrangement from largest to
smallest. The smallest saw blades will be stored furthest from the Blade Box Outer Panel (Figure 1,
Item 2).
Note: If only one slot will be needed, see Figure 1 for assembly, then skip to Step 4.
2.
Assemble additional storage slot(s) as shown in Figure 3.
3.
Attach the storage slot(s) assembled in Step 2 to the Blade Outer Box Panel (Figure 1, Item 2). See
Figure 4.
4.
Mount assembled Saw Blade Holder using 1/4" hardware via the holes in Blade Box Outer Panel
(Figure 1, Item 2).
Summary of Contents for QUIC-MOUNT QM-SBH
Page 2: ...Page 2 FIGURE 2 ...
Page 3: ...Page 3 FIGURE 4 FIGURE 3 ...
