background image

SAFE TOP

The heater is supplied with a safe top. This application decreases the temperature

of the top plate. In this way, the risk of harmful accidents at accidentally touching

the top plate is considerably decreased. However, be aware that the top plate still

becomes hot.

Avoid any contact with the top plate and grille.

THE RIGHT FUEL

Only use Class C1 paraffin fuel in accordance with BS2869 Part two, or equivalent.

Your Zibro heater has been designed for use with high-quality water-free pure

paraffin oil, such as Zibro Extra or Zibro Kristal. Only fuels of this kind will ensure

clean and proper burning. Lower quality fuel may result in:

E

excessive tar deposits on the glass fibre wick

E

incomplete burning

E

reduced heater lifetime

E

smoke and/or smells

E

deposits on the grid or mantle

Using the right fuel is therefore essential for safe, efficient, and comfortable use

of your heater.

Damage and/or malfunctions of the heater due to the use of other than high

quality water-free pure paraffin oil is not covered by the warranty.

Always refer to your local Zibro dealer for the right fuel for your heater.

MANUAL

A

INSTALLING THE HEATER

Carefully remove your Zibro heater from the box and check the contents.

In addition to the heater you also need to have:

E

a manual fuel pump

E

a transportation cap

E

these directions for use

Keep the box and the packaging materials (Fig. A) for storage and/or transportation.

Remove the other packaging materials:

E

Remove the packaging material from the grill 

G

. Lift the grill from the slot 

(Fig. B) and pull it forward.

E

Push the packing material on top of the combustion chamber 

D

slightly 

down and remove it (Fig. C). Remove the packaging materials from under 

the combustion chamber as well (Fig. D). 

E

Put the combustion chamber back into its place. The combustion chamber 

is positioned correctly when it can be smoothly moved a little to the left 

and to the right by its handle 

E

(Fig. E). Close the grill: Slightly lift it to 

reposition it in its slot.

E

Open the lid for removable tank 

H

and remove the piece of cardboard.

2

1

4

65

E

E

E

E

E

E

This transportation cap

is packed separately in

the box. Only this cap

ensures trouble-free

transportation of the

heater after use. 

Store it well!

B

C

D

E

G

F

p062_073_R421TC_uk.qxd  17-06-2010  14:05  Pagina 65

Summary of Contents for R 421 TC


















Reviews: