Zhone zNID-GPON-2402, Hardware Installation Manual

Page: 23 / 48

zNID 24xx models
zNID Hardware Installation Guide
23
Protocol Support •
GPON uplink
– ITU-T G.984 (GPON)
– Multiple T-CONTS per device
– Multiple GEM Ports per device
– 1:1 mapping of GEM ports into T-CONTS with priority queue based scheduling
– Activation with automatic discovered SN and password in conformance
with ITU-T G.984.3
– AES-128 Decryption with key generation and switching
– FEC (Forward Error Correction)
– 802.1p mapper service profile on U/S
– Mapping of GEM Ports into a T-CONT with priority queues based scheduling
– Support for Multicast GEM Port
•
Ethernet/IP
– Bridging and switching (802.1D / 802.1 Q)
– Eight traffic classes with 802.1p
– 802.3n flow control
– MAC address entries
For OMCI-configured traffic flows , no limit (no bridge table)
For Bridged VLANs , configured via Web UI or CLI in RG Mode, 4096 bridge
table entries are supported. (only the most recent 100 entries are displayed).
– VLAN tagging / untagging
– VLAN stacking (Q-in-Q)
– MAC limiting
– 802.1x Ethernet Authentication
– PPPoE client
•
DHCP server, DHCP client
•
FTP, TFTP
•
Telnet
•
HTTP
•
SSH
•
SNMP
•
NAT
•
QoS
– 802.1P/Q priorization
– Diffserv (RFC2474, RFC2475)
– Traffic shaping – bandwidth management and rate limiting
•
Firewall and Security
Table 2: zNID 24xx common specifications (Continued)
Specifications Values