manualshive.com logo in svg

Zhone zNID-GPON-2402, Configuration Manual

Share
Download
Zhone zNID-GPON-2402 Configuration Manual Download Page 73

Device info

 zNID 24xx Series Configuration Guide

73

 

IGMP

Internet Group Management Protocol (IGMP) is used to create group 
memberships for multicast streams. Normally IGMP is used for streaming 
video and other applications such as gaming, to provide more efficient use of 
the networks resources for these types of applications.

See 

Creating video connections 

on page 190

 for configuration information.

Figure 47:  The group membership table for IGMP

Table 23:  Table of IGMP group members

UI Label

Description

Group Address

Multicast IP group address.

Reporter IP

The IP address of the host in the multicast group. 

Reporter MAC

The MAC address of the host in the multicast group.

Interface

The Interface which discovered the multicast group.

VLAN

The VLAN which discovered the multicast group. 

Querier

TBD

Expires

The time before the multicast group is timed out.

Summary of Contents for zNID-GPON-2402



































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands