SkyZhone 1604, 1404, 1204 Hardware Installation Guide
31
Figure 10: Bracket attached to the mounting plate attached to the pole
5.
Adjust the shelf until it is level by rotating the unit along the curved slot tracks.
6.
Once the unit is level, securely tighten the center nut and four bolts that hold the
shelf to the pole mount bracket as shown in Figure 11.
7.
Attach the antennas to the unit. Note the antennas are different sizes. The three
longer antennas are connected to the top of the unit. The two shorter antennas
are mounted to the bottom of the unit. The antennas are not interchangeable. It is
critical that the longer antennas are on the top, and the shorter ones on the
bottom of the unit.
8.
Slide the unit into the sun shield housing.
9.
Secure with 4 (four) tamper-resistant screws, provided in the mounting kit,
through the holes on the front of the unit.
_________________________________________________________
WARNING!
Insure that the Chassis Ground is properly
connected before the next steps.
_________________________________________________________
10.
Attach the SHDSL cable to the SHDSL connector.
