Installing the SkyZhone access point
36
SkyZhone 1624, 1424, 1224 Hardware Installation Guide
Figure 17: Base, Bracket, and Front Cover displaying two holes for antennas
8
Attach the antennas to the SkyZhone access point.
Note that the antennas are different sizes. The three longer antennas are
connected to the top of the unit. The two shorter antennas are mounted to
the bottom of the unit. The antennas are not interchangeable. It is critical
that the longer antennas are on the top, and the shorter ones on the bottom
of the unit.
9
Slide the SkyZhone station onto the wall mounting bracket.
10
Secure the SkyZhone to the wall mounting bracket with the 4 (four)
tamper-resistant screws, provided in the installation kit, through the holes
on the front of the unit.
11
Attach the SHDSL cable. Also connect the optional console cable and
Ethernet cables, if they are being used. In some installations, it might be
easier to install the cables before mounting the unit to the bracket.
12
Attach the lid of the protective cover and secure it with the screws
provided in the installation kit. The final assembly appears in
Figure 18
,
and the final installation appears in
Figure 19
.
Figure 18: Wall Mount Kit - Final Assembly
