Installing the SkyZhone access point
34
SkyZhone 1624, 1424, 1224 Hardware Installation Guide
Figure 14: Contents of wall mount enclosure kit (from left: the lid, the front
cover, the bracket and the base)
To mount the optional cover
Note:
The mounting of the SkyZhone unit should be as high as
possible to ensure maximum coverage. A flat surface measuring 24
inches high and 36 inches wide will be needed to mount the unit
securely.
1
Find a flat surface that is at least 24 inches tall and 36 inches wide.
2
Drill the holes in the wall to align with the corresponding holes in the
mounting bracket. See
Figure 15
.
3
Obtain the proper screws (not included) to anchor the wall mount
assembly to the type of surface it is being mounted to.
4
Place the mounting bracket on the rear panel of the cover, lining up the
mounting holes.
5
Fasten the mounting bracket in the desired location with the appropriate
type of screw. Use the outside holes displayed in
Figure 16
. These should
line up with the holes in the cover.
