background image

4

English

Battery Safety Guidelines

1.  Prevent the batteries to come into contact with any kind of liquid. Do not leave batteries out in the rain 

or near a source of moisture. Do not drop the battery into water. If the inside of the battery comes into 
contact with water, chemical decomposition may occur, potentially resulting in the battery catching on 
fire, and may even lead to an explosion.

2.  If the battery falls into water with the stabilizer during use, take it out immediately and put it in a safe 

and open area. Maintain a safe distance from the battery until it is completely dry. Never use the battery 
again, and dispose of the battery properly as described in the Battery Disposal section below.

3.  If the battery catches fire, use water, water spray, sand, fire blanket, dry powder, or carbon dioxide 

fire extinguisher immediately to put out the fire. Please extinct the fire by applying the methods 
recommended above according to the actual situation.

4.  Never use non-ZHIYUN batteries. If replacement or backup is needed, please purchase new batteries 

from ZHIYUN's official website or authorized channels. ZHIYUN takes no responsibility for any damage 
caused by non-ZHIYUN batteries.

5.  Never use or charge swollen, leaky, or damaged batteries. Never use or charge if the battery smells, or 

overheats (exceeding maximum temperature of 160° F / 71° C). If your batteries are abnormal, contact 
ZHIYUN or a ZHIYUN authorized dealer for further assistance.

6.  The battery should be used within the temperature range from -10 ° C to 50 ° C. Use the battery in 

environments above 50 ° C can lead to a fire or explosion. Use of battery below -10 ° C can lead to 
serious battery damage.

7.  Do not use the battery in strong electrostatic or electromagnetic environments. Otherwise, the battery 

protection board may malfunction.

8.  Do not disassemble or use any sharp object to puncture the battery in any way. Otherwise, the battery 

may leak, catch fire or explode.

9.  Do not mechanically strike, crush, or throw the battery. Do not place heavy objects on the battery or 

charger.

10. Electrolytes inside the battery are highly corrosive. In case of accidental contact of any electrolytes with 

your skin or eyes, rinse immediately with water for at least 15 minutes and seek medical advice as soon 
as possible.

11. Do not use the battery if it has been involved in a crash or heavy impact.
12. Do not heat the battery and never put the battery in a microwave oven or in a pressurized container.
13. Do not place the battery cell on a conductive surface (such as a metal desk surface).
14. Prevent use of wires or other metal objects that could cause positive and negative short-circuit to the 

Disclaimer and Warning

Summary of Contents for SMOOTH-Q































Reviews: