Zhiyun Crane Plus, User Manual

Page: 15 / 20

23 zhiyun-tech.com 24 zhiyun-tech.com
ZW-B02 Wireless Remote Control(purchase separately)
MODE Button
Charging Indicator
Power/Shutter
(Dual-function button)
Shifter Lever
Bluetooth Indicator
Joystick
Power Level Indicator
Mounting Method
1. Loosen the thumb screw on the
back of the remote controller to
let loose of the rubber case (as
marked red in the Figure).
2. Install the remote controller to the extension rod or
dual handle for convenient operations (as shown in
the Figure above). Fasten up by tightening the thumb
screw on the back.
The remote controller turns off automatically when left idle for 2 minutes.
Specifications:
Charging voltage: 5V
Charging current: 100mA
Theoreticalworktime:≥ 30hr.
Built-in Polymer lithium battery capacity: 150mAh
Emission and received current: 11.9mA
Operating current: 4.2mA
Effective control distance: 10m /394 inch
(without blockage)
Bluetooth Indicator
No connection: Continuous flashing.
Connected: Shines solid light.
Power Level Indicator
90%-100%: quick flash for 4 times each second.
75%-90%: quick flash for3 times each second.
55%-75%: quick flash for2 times each second.
30%-55%: quick flash for1 time each second.
0%-30%: quick flashing.
Charging Indicator
Charging:
●
RED light.
Charging complete:
●
GREEN light.
ON/OFF & Video (Two-step shutter-release button)
1. Fully press the button for over 1sec. to turn on the remote control and enter master mode by
default.
2. Fully press the button for over 1s, when it is on to turn off the remote control (the indicator
switches off accordingly)
3. While stabilizer is connected to the camera: Under Photo mode, press the shutter button
halfway down to focus then fully press it to take the shot; Quickly double press the button (fully
press) to switch between Video and Photo mode.
Button Combinations
Power Toggle: While powering on, push the toggle in the W direction to enter into Slave
mode to upgrade the remote control firmware via the phone (First download the “ZY Play” App
and then update).
Power Mode Button: Press the mode button and power button at the same time to pair
the nearest stabilizer via bluetooth.
Mode button: Mode selection (sharing the same feature with gimbal)
Joystick: Directional control (sharing the same feature with gimbal)
Toggle:
To zoom in/out.
Proper camera cable connection is required to control the camera. Some remote control features
may not be supported for some camera models.
Usage of Main Accessories Usage of Main Accessories