background image

13

zhiyun-tech.com

14

zhiyun-tech.com

Start Up

Balance Adjustment

Level Adjustment on Pan Axis

Control Panel Introduction

3

2

Loosen Thumb Screw 

 . Adjust the Pan Axis until the camera can stay still while keeping 

the Vertical Arm 

2

 level when turned to the right/left side. Complete balance adjustment by 

tightening up Thumb Screw 

 .

Battery Level Indicator

Shines YELLOW light when the stabilizer is 
Powered on/off:
Quick flash for 3 sec. and shines solid for 1 sec. 
when powered on. Quick flash for 3 sec. when 
powered off.
Shines BLUE light when the stabilizer is in normal 
operation, the flashing frequency of the BLUE 
light indicates the current battery level:
Quick flash 4 times for battery level of 75%-100%.
Quick flash 3 times for battery level of 50%-75%.
Quick flash 2 times for battery level of 25%-50%.
Quick flash 1 time for battery level of 0%-25%.

Shifter Lever Operation

In the event when a SONY camera is connected: 

Push the Shifter Lever in T direction to zoom out, 

and in W direction to zoom in.

In the event when a Panasonic camera is 

connected: Move the Shifter Lever to either 

direction for focusing.

Micro USB Port

Connects the stabilizer to a computer through a 

Micro USB cable for on-line 

Mode Button

Press for 1 second to enter or exit standby 

mode.

Single press to switch between pan-following 

and lock mode.

Quick double press to enter the following mode.

Quick triple press to enter the selfie mode 

(180° rotation on pan axis)

Power ON/OFF

Power on the stabilizer by pressing the Power 

button for about 3 sec.

After the stabilizer is powered on, the Power 

button can be used for camera shooting control 

(only after the camera is connected to the 

stabilizer). 

Single press the button to take photos. 

Double press the button to start video recording. 

Double press the button again to stop recording.

Joystick Operation

Joystick controls the camera movement by 
turning the 3 axes up/down or left/right.

Joystick

Mode Button

Battery Level 

Indicator

Power ON/OFF

Shifter Lever

Summary of Contents for Crane Plus





















Reviews: