123 of 180
MAINTENANCE AND USE MANUAL
SQM25 N - SQM25 SN - SAB1000G
EN
If it is necessary to move the model trimmer and/or aspirator you must:
1.
disconnect the machine from the mains power supply;
2.
for the model trimmer: after cleaning the machine thoroughly (see Chap. 8) detach the
aspirator connector and close the main switch flap.
2a.
for the aspirator
SAB 1000 G
: empty the residue from the bag (see Chap. 8) and detach the
model trimmer connection hose.
3.
gather all its accessories together.
4.
grasp the machine by its base and make sure it is always kept in vertical position.
To this end always bear in mind the weight and dimensions of the unit being handled (see
section 4.2.2) to prevent any damage caused by inobservance of these measurements.
5.
Pack the machine in its original box or, if this is not possible, take all the necessary
precautions to protect the machine against knocks or drops, in that the goods are transported at
the owner's risk.
5.3
TRANSPORT AND MOUNTING
Failure to observe the above exonerates the Manufacturer from any
liability concerning machine malfunction and consequently renders the
Warranty null and void.
When shipping/delivering the machine to your Authorised Servicing Centre
always enclose a copy of the purchase document and a copy of the properly
compiled ID form.
5.4
ELIMINATION / DISMANTLING
When disposing of the
packaging materials
the user must comply with the standards in force
in his/her country regarding the following materials:
• Wood/paper: non-polluting materials, but must be recycled properly.
• Polystyrene/plastic: pollutants which must not be burnt (toxic fumes) nor dispersed into the
environment, but disposed of in compliance with the standards in force in the country of use.
If the machine is to be
dismantled
the user must, in compliance with EC directives and the laws
in force in the country of use, effect elimination and recycling of the following materials:
• Plastic and glass parts, insulated electrical wiring, rubber parts.
• There are no toxic or corrosive parts.
This product must not be disposed of as household waste but rather, when
no longer used, must be collected separately according to EC Directive
2002/96.
