background image

3. Safety instruction:   

The appliance is intended to clean cars, garden and roof etc.   
Never attempt to use power washers on or near any electrical outlets, fuse boxes, transformers, high voltage wires, etc. Severe 
electrical shock or death may occur. Never point nozzle at people or animals.   
 

KNOW YOUR PRESSURE WASHING EQUIPMENT 

1. READ YOUR OWNERS MANAUL CAREFULLY. Do not operate your power washer until you completely understand and can follow 
all operating instructions, precautions and safety rules.   
2. Restrict the use of your power washer to users who have read, understand and can follow all operating instructions, precautions 
and safety rules. 
3. Never allow children to use the washer. 
 

PLAN AHEAD 

1. Always wear ear protection to cut noise and eye protection and / or face shield to prevent debris from flying or ricocheting into eyes 
and face which could result in serous injury.   
2. Dress safely in long pants and wear safety boots, safety gloves, safety helmets with visors, ear defenders etc. Other protective 
equipment is advisable when using chemicals, cleaning detergents or other corrosive or abrasive substances.   
3. Do not operate pressure washing equipment if you have consumed alcohol or taken medication.   
4. Keep pets, children and bystanders a safe distance away from your work area. A minimum of 50 feet is recommended.   
5. Do not spray directly at glass or fragile objects.   
6. CAUTION after turning off your pressure washer and water supply, there is still high pressure water trapped in the system. You must 
release the pressure by triggering the gun after the engine has completely stopped. 
7. WARNING! Suds or soap powder are the only cleaning scour designed for this appliance. The use of other cleaning agent or 
chemicals may adversely affect the safety of appliance.   
 

PRECAUTIONS FOR GASOLINE ENGINE 

1. Follow all safety precautions, operating procedures and maintenance listed in your engine operator’s manual which came with the 
pressure cleaner.   
2. DO NOT fill the engine with gasoline when the engine is running, hot or near an open flame. DO NOT SMOKE.   
3. Do Not run power washers in an enclosed area. Exhaust fumes contain poisonous carbon monoxide gas. Breathing exhaust gases 
can cause serious illness or death.   
4. Do Not touch or come in contact with hot mufflers, cylinders, cooling fins or hot exhaust gases as this may result in severe burns.   
5. Never tamper with governor spring, governor links or other components which may increase the speed (RPM) of the engine.   
6. Do Not operate pressure cleaners in the presence of flammable vapors or gases. When servicing pressure cleaning equipment, be 
sure to properly dispose of any flammable materials.   
7. Do Not make adjustments to your equipment without first removing the spark plug.   
8. When transporting pressure cleaners, the fuel shut-off valves must be in the closed position, to prevent fuel from spilling out. 
 

MISCELLANEOUS SAFETY PRECAUTIONS 

1. Check all high pressure hose and fittings periodically for cuts or wear. Immediately replace all suspect components to prevent injury. 
Do not place high pressure hose on the engine muffler or drag across abrasive surfaces.   
2. Inspect pressure cleaner for oil, fuel and/or water leaks.   
3. Operate unit on level surface only. Otherwise fuel may spill on engine and/or pump. Lubrication may be insufficient if unit is not level.   
4. Never start power washers without adequate water supply.   
5.HIGH PRESSURE SPRAY CAN CAUSE SERIOUS INJURY Never point or aim the gun/wand at yourself or anyone else. Never put 
your hand, fingers or body directly in front of the spray nozzle. 
6. Do Not run the unit for longer that 3 minutes with spray gun in the closed position.   
7. Clean up spilled soap, fuel or oil immediately to avoid falls.   
8. Keep clutter out of work area to avoid falls.   
9. Never squeeze the spray gun trigger unless you are securely braced. The force of water through the nozzle is powerful enough to 
cause you to lose your balance and fall.   
10. Never attempt to use power washers on or near any electrical outlets, fuse boxes, transformers, high voltage wires, etc. Severe 
electrical shock or death may occur.   
11. Do not use the appliance if important parts of appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.   
12. Only use genuine pressure cleaning equipment parts (eg.: High pressure hoses, fittings and couplings etc. ) for any and all repairs 
of your pressure cleaner. Failure to do so may result in injury or cause hazardous operating conditions to exist.   
To order parts, call 86 -0576-2885179. For technical support or service call (86 -0576-2885179 Mon- Fri. 8am to 5pm.   

 

Water Supply 

(Cold Water Only) 

Water hose must be at least 3/4 inch in diameter. 
Flow rate of water supply must be more than 1.85 GPM (gallons per minute). 
Flow rate can be determined by spraying the water into an empty 5-galons container for one minute. 
The water supply temperature must not exceed 50

 

Never use water contained with solvents, e.g. paint thinners, gasoline, oil, etc. 
Always prevent debris from being drawn into the unit by using a clean water source. 
We strongly recommend that this high pressure washer should not be left running without the trigger gun being engaged for more than 
5 minutes or longer. 
 

Caution 

Follow the maintenance instructions specified in the manual. 

Summary of Contents for AGW-90C


















Reviews: