9
4 Web Configurations
On the web interface, you can also configure and update the Access Controller.
Web configurations differ depending on models of the Access Controller.
4.1 Initialization
Initialize the Access Controller when you log in to the web interface for the first time or after the
Access Controller is restored to the factory defaults.
Prerequisites
Make sure that the computer used to log in to the web interface is on the same LAN as the Access
Controller.
Set a password and an email address before logging in to the web interface for the first time.
Step 1
Open a web browser, and go to the IP address (the default address is 192.168.1.108) of the
Access Controller.
You can log in to the web with Chrome or Firefox.
Figure 4-1 Initialization
Step 2
Enter and confirm the password, enter an email address, and then click
Completed
.
●
The password must consist of 8 to 32 non-blank characters and contain at least two
types of the following characters: upper case, lower case, numbers, and special
characters (excluding ' " ; : &). Set a high-security password by following the password
strength prompt.
●
Keep the password safe after initialization and change the password regularly to
