4
Recommended Installation Location
Figure 2-4 Recommended installation location
Installation Location Not Recommended
Figure 2-5 Installation location not recommended
2.3 Installation Process
The Access Controller has four installation methods: wall mount, floor bracket mount, turnstile
mount and 86 case mount. This section only introduces wall mount and 86 case mount. For details of
floor bracket mount and turnstile mount, please refer to user's manual of corresponding devices.
2.3.1 Wall mount
Step 1
According the hole's position of the bracket, drill four holes and one cable outlet in the
wall. Put expansion bolts in the holes.
Step 2
Remove the sheet metal at the bottom of the bracket.
Step 3
Use the four screws to fix the bracket to the wall.
Step 4
Wire the Access Controller. For details, see "2.1 Wiring".
Step 5
Use two screws to fix the back cover to the Access Controller.
Step 6
Fix the Access Controller on the bracket.
Step 7
Screw in two screws securely at the bottom of the Access Controller.
