10. Insert the shim (2) into the bearing hole.
11.
Carry out the following three work steps
immediately one after the other.
Risk of burn injuries due to contact with cold
surface.
Slight to moderate injury possible.
ð
Wear protective gloves.
Undercool the bearing outer ring (1).
12. Insert bearing outer ring (1) into axle housing
until contact is obtained.
Fig. 127
13. Use 5870.345.080 [Assembly fixture] to bring
both bearing outer rings into contact position.
Fig. 128
14. Press on the bearing inner ring until contact
with the pinion is obtained.
Fig. 129
Assembly
76
EN 4472.751.001 - 2015-11
Summary of Contents for AV 110
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES ...
Page 137: ......
