After completion of repair, assembly, and maintenance work, as well as inspections, the specialized staff
must ensure that the ZF product is once more functioning perfectly and is safe to operate.
The user/operator is responsible for assigning the corresponding section of the documentation to the
correct target group. The former must ensure that the corresponding section of the documentation is kept
in close proximity to the ZF product and remains accessible to the concerned target group.
Using ZF products
Impermissible superstructures, add-ons, modifications, and changes to the ZF product may affect the ZF
product's operational safety.
Unless explicitly permitted, no repair, assembly, and maintenance work may be performed while the
engine is running. Secure the engine against an unintentional start and the vehicle against unintentional
movements. Attach a "Do not operate" sign which is visible for everyone! Keep uninvolved parties away.
Prior to starting work, always secure the ZF product properly using suitable means. Do not work on ZF
products that are only held with lifting equipment or a crane. Risk of injury from tilting or falling parts
and/or tools.
▪ Do not walk under suspended loads.
▪ Keep distance.
Lifting and moving heavy parts without tools may lead to health damage or serious injury.
▪ Only use permitted means of transport, lifting tools with a sufficient load capacity, and suitable lifting
technology.
▪ Observe safety regulations.
Increased risk of injury in the event of contact with cooled down or heated parts. Only touch parts when
wearing suitable protective gloves.
Noise
Wear suitable ear protection at all workplaces with a sound pressure level above 85 dB(A). The country-
specific safety regulations and the accident prevention regulations apply irrespective of this. Noise can
lead to a higher risk of accidents if the noise affects the perception of acoustic signals, warning calls, or
other sounds alerting to danger.
Handling operating supplies and auxiliary materials
Increased risk of injury at contact with heated, cooled down, or caustic operating supplies and auxiliary
materials (e.g. lubricants, cleaning agents, nitrogen).
▪ Prevent skin contact.
▪ Do not drink.
▪ Do not inhale vapors.
▪ Keep away from ignition sources – do not smoke.
Store operating supplies and auxiliary materials in suitable and correctly labeled containers.
Use suitable protective clothing, protective gloves, and protective goggles/face protection.
Pay attention to the manufacturer's regulations and accident prevention regulations.
Safety Instructions
EN 4472.751.001 - 2015-11
7
Summary of Contents for AV 110
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES ...
Page 137: ......
