1.
Push O-rings onto the screw plugs.
2.
Screw in screw plugs oil drain (2) and tighten.
Tightening torque: 130 Nm
3.
The use of a non-approved lubricant can lead to property damage.
ð
Only use lubricant from the currently valid ZF List of Lubricants.
Slowly fill in oil at the oil filling hole until the bottom edge of the oil level hole (1) is reached.
4.
Check oil level after some minutes and correct if necessary.
5.
Screw in screw plug oil filling (3) and tighten.
Tightening torque: 70 Nm
6.
Turn in screw plug oil level (1) and tighten.
Tightening torque: 70 Nm
Assembly
132
EN 4472.751.001 - 2015-11
Summary of Contents for AV 110
Page 1: ...REPAIR INSTRUCTIONS AV 133 Bus axle with compact bearing BUSES ...
Page 137: ......
