13
Memory Recall
12
Taking a Measurement
Finalizing the measurement
After the monitor completes the measurement, it will automatically display your
systolic, diastolic measurement and pulse rate.
Memory
The monitor will automatically store your readings.
Turn off the unit
The monitor will turn off automatically after 2 minutes. To turn it off manually
push the START/STOP button.
5
4
3
Deflating
Deflating
Maximum inflation
Inflating
Start to inflate
The unit will automatically start inflation until the optimum air pressure in the cuff
is reached. The device may re-inflated automatically when the first inflation is not
enough. Note: In an emergency press the START/STOP button and the device
starts releasing the air in the cuff immediately.
Inflation and measurement.
2
Start to inflate
Deflating automatically
All symbols display
All display symbols appear on the screen. The cuff starts to inflate automatically.
Press the START/STOP button.
1
START/STOP
START/STOP
MEM
MEM
How to recall individual measurements
Press the memory button to view the newest measurement.
Press the memory button to view the oldest measurement.
Press the button repeatedly to view all readings.
The Average
measurement value
The 1st newest
measurement value
Turn to next
MEM
How to recall the memory’s average value
Press the memory button to view the average of the last 3
measurements.
This blood pressure monitor can store 60 readings. Once the memory is
full (60 readings) it will automatically delete the oldest reading and replace
it with the newest one.
Average Function: This monitor will calculate the average of the last 3
readings taken. When recalling the memory the first reading displayed is
the average, indicated by the “AVG” symbol on the display.
How to Use the Memory Function
Forward
Backward
Clearing Values from Memory
Press the memory button once until numbers are displayed. Press and
hold the memory button and also press and hold the START button.
Keep both buttons pressed for about 5 seconds until the memory
is erased.
for about 5 seconds until the memory is erased.
The 1st newest
measurement value
The 2nd newest
measurement value
The 60th newest
measurement value
