9
8
BEFORE YOU START
INTRODUCTION
List
1.Blood Pressure Monitor
(UAM-710)
2.Cuff
(Type BF applied part)
( 22cm~42cm)
(Please use ZEWA
authorized cuff. The size
of the actual cuff please
refer to the label on the
attached cuff.)
In order to get the best effect and protect your monitor,please use the right
battery which complies with CE safety standard.
•
Open the battery cover.
•
Install the batteries by matching
the correct polarity, as shown.
•
Replace the battery cover.
Installing and Replacing the Batteries
CAUTION
CAUTION
Replace the batteries whenever the below happen
The shows
The display is dim.
The display does not light up
AC adaptor
The Choice of Power Supply
1
.Battery powered mode:
6VDC 4×AAA batteries.
2
.
AC adaptor powered mode (Not included):
6V 1A
(Please only use the recommended AC
adaptor model).
Please unplug the adaptor to depart from
the using utility power.
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
Monitor Components
Component list of
pressure measuring system
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
BATTERY COMPARTMENT
CUFF
AIR HOSE
AIR CONNECTOR PLUG
LCD DISPLAY
MEM BUTTON
START/STOP BUTTON
SET BUTTON
DC POWER SOCKET
4.User manual
3. 4×AAA batteries
