56
Installation and Operating Instructions
V02
Information for choosing the safety
standard VDE-AR-N 4105
If a central network and system protection device is used for power
generation systems, the value of the rise-in-voltage protection U > of
1.1Un presented in the integrated network and system protection can
be changed, but a password is required. It is not necessary to adjust
the value of the displacement power factor cos(phi) if the power
generation system is
Σ
SAmax Amax generation s set to 1 as default in
the embedded inverter software. However, if the power generation
system is 3.68KVA <
Σ
SAmaxded inverter software. cos(phi)
characteristic curve defined in VDE-AR-N 4105 shall be applied
through the ZeverCom/ZeverManager.
Summary of Contents for Zeverlution 1000S
Page 1: ......