Installation
2.8
Connecting the foot pedals
•
Connect the foot pedals “glass plate up” and “glass plate down” [29] at the rear
side of the book cradle (refer to blue resp. red color margins).
•
To avoid unwanted disconnection of the cables, the round plugs have a thread.
Please tighten them manhandled
2.9
Connecting the power cords
•
Connect the power cord [30] to the drive unit at the appropriate socket at the
back side of the book cradle
•
Connect the power cord [31] to the appropriate socket at the back side of the
book cradle and the other end to a mains socket
The scanner might be operated at 220-230V AC at 50/60 Hz only!
For other voltages use a power converter!
•
For switching on and off the power of the scanner use the mains switch [32]
29
32
31
30
Fig.
14
12
