Installation
2.3
Fixing the scan unit (reflector)
Fig. 4 shows the drive unit before the installation of the reflector, Fig. 5 after the
installation
•
The reflector [10] has to be installed with two persons. It should be moved
over the fixing plate [11] at the drive unit [12] by turning it a little bit from front to
back.
•
Do not touch the mirror’s surface with your fingers, support it at the metal
frame!
•
Slide the four threaded pins into the designated holes [13] at fixing plate.
•
The reflector should be positioned downwards until it touches the supporting
edge [14]
13
14
11
12
Fig. 4
10
Fig. 5
6
