0010015443-01.1V
8.3 Microswitch adjustment
8.4 Burnt gas outlet control device
3
2
1
21
6720871998 (2019/10)
It is prohibited to operate the appliance without the water filter
installed.
ÿ Blow the burning surface using a jet of air [2].
ÿ Open a hot water tap. ÿ Position the
microswitch as per Fig 24.
[2] Jato de ar
Fig. 22
The device should switch off within a few minutes.
[3] Water filter
CAREFUL:
ÿ Close the hot water tap The
microswitch is adjusted.
Fig. 24 Microswitch reset
Fig. 23
Maintenance (only for specialized and qualified technicians)
In battery-powered models, the battery box can be removed to
facilitate the micro-switch adjustment process.
[1] Brake
[2] Tampa
ÿ Always install the water filter.
Water filter / Restrictor ÿ
Purge the appliance (ÿsection 4.6). ÿ
Close the water valve upstream of the appliance. ÿ
Remove the fixing brake [1]. ÿ
Remove the cover [2]. ÿ
Replace the water filter [3].
ÿ Remove and clean the pilot burner. ÿ
Remove and clean the pilot injector.
Pilot burner and pilot injector
Check that the device is working properly
ÿ Put the device into operation. ÿ Bring a
heat source closer to the burnt gas output control device (e.g. a
dryer).
Materials damage!
[1] Brush
0010015560-01.1V
Machine Translated by Google