4.8 Burnt gas outlet control device
4.7 Rearm the device
4.9 Cleaning the front of the appliance
4.6 Bleeding the device
1
0010015444-01.1V
2
ÿ Place a container under the appliance to collect all the
water that comes out of the appliance.
ÿ Remove the fixing brake [1].
Do not use corrosive and/or abrasive detergents.
Some of the possible faults can be resolved by resetting the
device, to do so:
62 °C
Less than 1 second About 1 second
About 5 seconds About 10 seconds
Intoxication!
Materials damage!
ÿ Wait 10 minutes and switch the appliance back on.
If there is a risk of freezing, proceed as follows:
ÿ Close the water valve upstream of the appliance.
Instructions for use
57 °C
About 1.5 seconds Less than 3 seconds
ÿ Let all the water contained inside the appliance drain out.
ÿ Only clean the front of the appliance with a cloth and a little
detergent.
Temperature
About 15 seconds About 30 seconds
DANGER:
ÿ Ventilate the compartment.
ÿ Call a specialized and qualified technician.
Time to cause a burn
68 °C
Operation and precautions
The probe resets itself after a cooling period.
ÿ Remove the batteries.
60 °C
About 1 second
RECOMMENDATION:
ÿ Purge the device.
ÿ Remove the cover [2].
Intoxication!
[1] Brake
55 °C
About 2.5 seconds Less than 5 seconds
Under no circumstances should the device be disconnected,
damaged or replaced with a different part.
Whenever there is a risk of freezing, water inside the appliance
can damage components.
ÿ Open a hot water tap.
Elderly/children
under 5 years old
Tab. 6
About 1.5 seconds
If the device switches off during use:
If the device switches off again:
The user should never touch the device.
[2] Tampa
Adult
ÿ Close and open a hot water tap.
This device checks the conditions for evacuating burned gases
and, if these are deficient, it automatically turns off the device,
preventing combustion gases from entering the compartment
where the device is installed.
65 °C
tion.
DANGER:
Fig. 10 Purga
6720871998 (2019/10)
13
Machine Translated by Google