Zeus Technology Co., Ltd. Shenzhen
5
3.Functional testing
a. Battery Test
After the normal boot, press any key to enter the main menu, as shown in
Figure 3.1.0.
Press "▲ ▼" button, select "1 battery test" press <Enter> key to enter the
next one, if the battery voltage is too low (less than 11.5V) will be prompted
interface (Figure 3.1.1), press <Enter> key to continue measuring, <Esc> key
to abandon measurement. If the battery voltage is normal, it will go directly
to the battery type selection screen (Figure 3.1.2). On the subject of battery
type battery by selecting the corresponding option.
Press <Enter> key to enter the next one. Enter battery specifications set
value (Figure 3.1.3).
"▲" setpoint plus 5
"▼" setpoint minus 5
"
◀
" set value minus 100
"
▶
" set value plus 100
After setting the setpoint press <Enter> key to start the measurement. Will be
displayed after the measurement test results shown in Figure 3.1.4
图
3.1.0
