ZETRON 4000 Series, Installation Manual

Page: 279 / 418

279
System-Specific Definitions
Input (Intercom)
When the Input (Intercom) option button is selected, the screen is configured as shown in
Figure 58 .
Setting the Intercom Channel Used with the Intercom Input
This entry identifies the audio channel used to route the intercom audio. Choose the
desired entry from the drop-down list of available intercom channels.
Setting the Intercom Select Output
This selection specifies which auxiliary output is used to activate the intercom audio.
Figure 58: Aux Input (Intercom) Definition window
Note If the intercom channels have not yet been defined, you will have
to come back to this point later to make your selection.
Note If the outputs have not yet been defined, you will have to come
back to this point later to make your selection.