ZETRON 4000 Series, Installation Manual

Page: 142 / 418

Wireless Interface Options
142 025-9533Y
Other Versions of EDACS
Consult your radio programming manual on the procedure for programming dual control
head operation. Also, see above instructions for basic flow of programming. The factory
attached control head should be programmed as CUB (control unit B) while the Zetron
equipment should be programmed into the radio as being CUA (control unit A). Upon
programming completion the factory attached control head should read *DUAL*.
Operation
Programming the Console
IntegratorRDPS is used to program the IntegratorRD console position. See
IntegratorRDPS Programming on page 259.
Channel Definition
To enable operation of an Orion channel it must be specified using the Edit, Channel
Definitions menu. For each channel in the system, the type “E/ORION” must be specified
for the Control Type field.
Control Buttons
There are several EDACS channel control buttons available for controlling an EDACS
radio. These buttons may be programmed to operate on the video screen or the audio
panel. The Edit, Screen Buttons and Edit, Keyboard Layout menus are used to program
the button and panel layouts (see Table 60 ).
Table 60: Control Button Descriptions
Button Function Description
EDACS Clear Used to clear menu-selected functions.
EDACS, I-Call, Next Scrolls through radio-programmed individual call users.
Not supported by IntegratorRD
EDACS, I-Call, Prev Scrolls through radio-programmed individual call users.
Not supported by IntegratorRD
EDACS, Emergency When held for 2 seconds, causes the radio to transmit an
emergency call on the current talkgroup.
EDACS, Emerg. Clear Clears a receive or transmit emergency condition.
EDACS, Next Group (

) Scrolls through radio-programmed talkgroups.
EDACS, Prev. Group (

) Scrolls through radio-programmed talkgroups.
EDACS, Private Enables/Disables radio encryption.
EDACS, System Scrolls through radio-programmed systems.
EDACS, Scan Enables/Disables radio scan.