background image

The button for temporary deactivation of brakes of the trailer or semi-trailer

The temporary trailer or semi-trailer brake deactivation button (1) is located on the dashboard panel.

Prior to using the button for temporary deactivation of brakes of the trailer or semi-trailer, it is 

always necessary to provide sufficient space in front of the tractor and behind the connected trailer 
or semi-trailer where no obstacles or persons will be present for the case that the effect of the 

parking braking will not be sufficient and the combination of vehicles moves.

Only the air brakes are deactivated by the button for temporary deactivation of brakes of the 

trailer or semi-trailer.

The button for temporary deactivation of brakes of the 

trailer or semi-trailer can be used by the operator of the 

tractor with the connected trailer or semi-trailer to make 

sure that the effect of the parking braking system of the 

tractor with the connected trailer or semi-trailer when the 
tractor is braked with the hand brake is sufficient.

If there is a tractor with the connected trailer or semi-trailer 

which is braked with the hand brake and the key in the 

switch box is in the position (I), and we press the button 

for temporary deactivation of brakes of the trailer or semi-

trailer, the trailer or semi-trailer is deactivated for the time 
when the button is pressed (the trailer or semi-trailer does 

not brake). When the button for temporary deactivation of 

brakes of the trailer or semi-trailer is released, the brakes 

of the trailer or semi-trailer are activated (the trailer or 

semi-trailer brakes).

CONTROLS, INSTRUMENTS & OPERATIONS 

58

Summary of Contents for UTILIX HT Series



























































































































































Reviews: