Zetor UTILIX HT Series, Operator'S Manual, Page: 53 / 154

Cruise control button
Cruise speed control switch
Load sensing button
z
Engaging Cruise Control
- Depress the forward speed control pedal until the
required speed is achieved.
- Press the cruise control button to engage cruise
control.
- Release the forward speed control pedal.
- The cruise control is only operational when the
machine is traveling forward.
z
Disengaging Cruise Control
To disengage the cruise control you can either
press the cruise control button or depress the brake
pedal.
U18N020
The cruise control speed can be increased and decreased
when the cruise control function is activated.
To increase the cruise control speed by a certain
increment, press and release the upper part of the cruise
control (+) switch. Press and release again to increase
cruise control speed by one more step.
To decrease the speed by a certain increment, press and
release the lower part of the cruise control (+) switch.
Press and release again to decrease cruise control speed
by one more step.
The setting is canceled when the cruise control function is
deactivated.
U18N021
The load sensing function is used to prevent the motor
from stopping at high load.
Press the load sensing button to activate the load sensing
function.
If the engine speed is less than 2000 rpm, the engine
speed shall be 2000 rpm.
If the engine speed is higher than 2000 rpm, the engine
speed shall be maintained at this level.
If the engine speed decreases below the set range, the
control adjusts the hydrostatic transmission ratio to avoid
engine choking. The higher the engine load is, the more
engine revolutions and speed are reduced.
Press the button again to deactivate the load sensing
function.
U18N022
CONTROLS, INSTRUMENTS & OPERATIONS
52