Zetor MAJOR CL Operator'S Manual Download Page 89

Page: 89 / 134

Valve for filling tires with liquid

Making front wheels stable

Filling tires with liquid procedure

E556

1. by heaving the tractor relieve tire and turn the wheel valve up (A)

2. let out air and unscrew the valve insertion
3. screw in the adapter for water filling, muzzle a hose for liquid inlet

4. fill the tire with a prescribed amount of liquid

5. it is possible to use head tank (B) or you can do the filling under pressure (C)

6. remove the hose and unscrew the adapter for water filling

7. screw in the insertion of a valve and inflate the tire to prescribed pressure (D)

8. after inflating screw in a protective cap on the valve
9. fill the second tire in the same way

All air locks of rear wheels are equipped with a valve,
which enables to fill air locks with liquid when using an

adapter.

Tubeless tires are not filled with liquid!

Filling air locks of front tires and double mounting of

rear wheels by liquid is not permitted!

NM13N104

Do not forget to lock a tractor against motion

by making front wheels stable before lifting the rear

wheels!

NM13N103

BALLAST WEIGHTS

Summary of Contents for MAJOR CL







































































































































Search results

Summary of Contents for MAJOR CL

Reviews:

Zetor MAJOR CL, Operator'S Manual, Page: 89 / 134

Search results

Summary of Contents for MAJOR CL

Reviews: