manualshive.com logo in svg

Zetor MAJOR CL, Operator'S Manual

Share
Download
Zetor MAJOR CL Operator'S Manual Download Page 22

Preventive daily maintenance

Fuel system leaks

Engine oil level

Cooling system

Perform daily or at least after each 8 - 10 hours of 
operation.

NM13N083

Check the fuel system for leaks, including the fuel tank. 
Repair any leaks immediately. The hole for draining dirt 

from the fuel tank is found in its bottom. 

NM14D027

Perform the check daily before starting the operation when
the tractor is standing horizontally and the engine is not 

running. The engine oil dipstick (1) is located on the right 

side of the engine.

Take out the dipstick (1), wipe it with a clean cloth without 

fibres and insert it back till the end.
When the dipstick is taken out again check the oil level.

The oil level must always be in the range from MIN and 

MAX.

Add the oil as necessary.

NM15D65

Check the connections of the engine cooling system for 
leaks and the coolant quantity in the expansion tank. 

Replenish the missing quantity up to the upper mark 

indicated MAX. The minimum acceptable cooling liquid 

level is indicated by the MIN mark. 

Only release the overpressure plug when the 

coolant has cooled down! There is a danger of 

scalding! 

NM15D028

PREVENTIVE DAILY MAINTENANCE 

21

Summary of Contents for MAJOR CL







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands