Zetor COMPAX CL 35 NC Operator'S Manual Download

Page: 58 / 114

Joystick Lever

To control the front loader or the front three-point hitch, the joystick lever is used. It allows to control the
lifting, lowering and unloading of the front loader with one lever.

Whenever the joystick lever is not used, lock it in the neutral position with the lock button.

Otherwise, the implement may drop unexpectedly, in case the joystick lever is moved accidentally.

A - Lifting of the Loader Boom
B - Lowering of the Loader Boom
C - Rolling the Loader Adapter Back
D - Tilting the Loader Adapter Back

CCL3540028

Do not operate the boom and adapter at the same time, the loader may not work properly

due to insufficient oil flow.

Joystick lever lock

With this simple safety system, the joystick can be locked
by pressing and unlocked by pulling the control.

- Locking the Joystick

- Unlocking the Joystick

U18N040

TRACTOR CONTROLS

Summary of Contents for COMPAX CL 35 NC



















































































































Search results

Summary of Contents for COMPAX CL 35 NC

Reviews:

Related manuals for COMPAX CL 35 NC

Brands by name

Popular brands

Zetor COMPAX CL 35 NC, Operator'S Manual

Search results

Summary of Contents for COMPAX CL 35 NC

Reviews:

Related manuals for COMPAX CL 35 NC

Brands by name

Popular brands