Zetor COMPAX CL 35 NC, Operator'S Manual

Page: 83 / 114

Electric Lines Check
Loose wire terminals can cause contact break and damaged wires can lead to poor electrical operation, short
circuits and fire. Replace or repair worn and damaged wires.
If the insulation of any conductor is damaged, wrap this conductor with insulating plastic tape or replace it.
If the conductor clips or straps are damaged, secure the wires with new clips or straps.
Have the lines checked regularly once a year by an authorized service center to prevent fire.
Fuses Check and Replacement
If an electrical system does not function correctly while driving, check for a blown fuse:
1. Remove the fuse box cover.
2. Remove the blown fuse.
3. Insert a new fuse of the same rating.
4. The function and rating of each fuse is indicated on the fuse box cover.
Always eliminate the cause of the fuse blowing, otherwise a new fuse is likely to blow as well.
Always use a fuse of the specified rating, never replace a blown fuse with a higher fuse rating or
a wire.
Fuses are installed in this tractor to prevent any possible
accident in the event of a malfunction of the line circuit.
CCL3540050
1 - Normal condition
2 - Blown
HODP141
Fuse Panel
MAINTENANCE
82