background image

7

WARNING:

 

Your smoke alarm will not 

operate without sufficient power.

As the alarm’s power pack reaches the end 

of its life a low power warning chirp will be 

emitted every 40 seconds. When this occurs 

you must replace the unit within 7 days.

IMPORTANT:

 

Smoke alarms are 

designed to alert you with an audible 

alarm at a level specified by the British 

Standard BS EN 14604: 2005. Closed doors, 

walls and high ambient noise levels will 

reduce this level. Temporary or permanently 

impaired hearing may result in the alarm not 

being heard. Stereos, traffic and other loud 

sources may also prevent the alarm being 

heard. Heavy sleepers and residents under 

the influence of alcohol or drugs may also 

not hear or respond to the alarm. Test and 

check that you can hear the alarm in all 

circumstances. If in doubt install additional 

smoke alarms as required.

WARNING:

 

The Smoke alarm is not 

suitable for alerting hearing impaired 

residents. We recommend that specially 

designed warning systems be installed that 

will alert hearing impaired residents.

WARNING:

 

The smoke alarm 

accompanying this manual employs the 

latest technology and is independently tested 

as being compliant with all the relevant British 

Standards. However, as with any electronic 

product it may fail and may not sense all 

types of fire within sufficient time to alert you 

of the danger and provide adequate time 

for your escape. In order to maximise your 

level of safety always test your smoke alarm 

frequently to ensure it is in full working order.  

Your Zeta smoke alarm is only suitable for 

use in domestic/ residential applications 

as covered in this manual. It is not suitable 

for commercial or industrial applications. 

It is designed to sense smoke and alert 

you. It will not sense carbon monoxide, 

 

flames, heat or gas. It will not prevent or 

extinguish fires.

This Zeta smoke alarm has a limited life of 

10 years and should not be considered as 

a substitute for life or property insurance. Like 

all electronic equipment, it can wear out or 

fail. It should be tested weekly and replaced 

immediately in the event of failure, and 

replaced every 10 years regardless.

WARNING:

 

Prolonged exposure to 

temperatures outside those stated above 

will reduce product life. 

Summary of Contents for ZD-SI-610/ZD-SO-610



























Reviews: