background image

PREMIER QUATRO USER MANUAL, MAINTENANCE GUIDE & LOG BOOK (Fyreye MKII) 

#Doc No. GLT-215-7-2 

 

PAGE 37

 

 

Issue: 1.08   Author: TE/NJ     Date: 26/05/2017

 

 

Design Certificate 

(Page 2 of 2) 

 
Measures incorporated to limit false alarms. Account has to be taken of the guidance contained in section 3 
of BS 5839-1:2013 and, more specifically (tick as appropriate): 

 

 The System is manual. Type & siting of manual call points takes account of the guidelines contained in 

section 3 of BS 5839-1:2013 

 The system incorporates automatic fire detectors, and account has been taken of reasonably 

foreseeable causes of unwanted alarms, particularly in the selection and siting of detectors 

 An appropriate analogue system has been specified 
 An appropriate multi-sensor system has been specified 
 A time-related system has been specified. Details:  

 
 
 
 

 Fire signals from automatic fire detectors result initially in a staff alarm, which delays a general alarm / 

transmission of signals to an alarm receiving centre (delete as applicable) for             min. 

 Appropriate guidance has been provided to the user to enable limitation of false alarms. 
 Other measures as follows:  

 
 
 

INSTALLATION & COMMISSIONING RECOMMENDATIONS 

It is strongly recommended that installation and commissioning be undertaken in accordance with the 
recommendations of section 4 and section 5 of BS 5839-1:2013 respectively. 
 

SOAK TEST 

 In accordance with the recommendations of clause 35.2.6 of BS 5839-1:2013, it is recommended   that 

following commissioning a soak period of                            should follow. 
(Enter a period of at least 1 week) 
 

 As the system incorporates no more than 50 automatic fire detectors, no soak test is necessary to satisfy 

the recommendations of BS 5839-1:2013. 
 

VERIFICATION 

Verification that the system complies with BS 5839-1:2013 should be carried out, on completion, in 
accordance with BS 5839-1:2013 Clause 43. 

 Yes 

No 

 to be decided by the purchaser or user 

 

MAINTENANCE 

It is strongly recommended that, after completion, the system is maintained in accordance with section 6 
of BS 5839-1:2013. 
 

USER RESPONSIBILITIES 

The user should appoint a responsible person to supervise all matters pertaining to the fire alarm system in 
accordance with the recommendations of section 7 of BS 5839-1:2013. 
 

www.acornfiresecurity.com

www.acornfiresecurity.com

Summary of Contents for Premier Quatro QT/4P










































Reviews: