PREMIER POWER PACK INSTRUCTION MANUAL
GLT.MAN-138
PAGE 6
Issue: 1.13 27/7/2012 N.R.P.J.
MOUNTING THE POWER SUPPLY
The Premier Power Pack range of Power supplies are suitable for indoor use only.
Before fixing the Power supply to the wall, consider the planned cable entry. The Premier Power Pack PSU has
top & bottom 20mm cable entries. If other entries are required, the box can be carefully drilled before fixing to
the wall.
Fix the Premier Power Pack to a suitable sturdy Flat surface. Fitting the PSU at eye level will allow the panel`s
display to be easily read. Use Fixing screws suitable for the chosen surface, remembering that with batteries
fitted, the Power supply will be quite heavy.
If additional cable entries have been cut into the box, ensure that all swarf has been removed. The cutout will
probably have a sharp edge that could damage the cables. Use suitable insulation to cover the sharp edges.
Enclosure for Power Pack 2.0 / 12 (max Batteries 12Ah)
30
295
335
40
187.5
335
375
Enclosure for Power Pack 5.0 / 17 (max Batteries 17Ah)
30
295
403.5
40
187.5
335
375
