Memories
Betapack 4 will store 12 memories for standalone operation, these can only be re-called if there is no DMX present.
1. Set-up the scene using the ‘Manual’ control function or a DMX controller.
2. Select ‘Memory’ using the ‘Mode’ button.
Using the ‘Up & Down’ Arrows select the required memory number and press the ‘Enter’ button to confirm. A ‘p’ should
appear next to the memory to signify that it has been programmed.
Holding both the ‘Up & Down’ Arrows for 1 second will clear the selected memory. If these buttons are held for 5
seconds, ALL memories will be cleared.
If memories are cleared which are used in sequences, they will be removed automatically from those sequences.
Zero 88 - Betapack 4 - Page 6 of 12
Printed: 26/04/2021