manualshive.com logo in svg

Zero88 BETAPACK 4, Configuration & Settings

The Zero88 BETAPACK 4 is a versatile lighting control system designed for various settings. Users can easily configure and customize settings using the detailed manual available for free download on our website. Ensure smooth operation and optimal performance by downloading the manual from manualshive.com.

Share
Download
background image

Firmware Version

To identify which version of firmware is loaded in Betapack 4, press the ‘Up & Down’ Arrows until the firmware version
is shown in the display (e.g. 02.00) Press and hold the ‘Enter’ button for 1s, and Betapack 4’s CPU serial number will
be displayed. Press the ‘Enter’ button again to return to the version display. Note that the firmware version will also be
shown briefly on start up.

Zero 88 - Betapack 4 - Page 12 of 12

Printed: 26/04/2021

Summary of Contents for BETAPACK 4













Reviews:

No comments

Related manuals for BETAPACK 4

Unika PC PLUS II User Manual preview
PC PLUS II
Brand: Unika Pages: 4
Ormazabal velatia ekor.gid General Instructions Manual preview
velatia ekor.gid
Brand: Ormazabal Pages: 32

Brands by name

Popular brands

Load more brands