Zero DSR 2018 Owner'S Manual Download

Page: 85 / 162

General Maintenance

6.11

Rear Brake Fluid Reservoir

The reservoir is located inboard on the frame behind the
heel guard.

Note: The motorcycle should be in an upright position prior
to checking fluid level.

Inspect the level of the rear brake fluid through the
reservoir housing. If the fluid level is visibly below the low
minimum

LOWER

indicator (C), brake fluid must be added

until level reaches the upper

UPPER

indicator (B). Do not

overfill.

Clean any dirt or debris from the cap and reservoir opening
(A) before opening the reservoir.

Unscrew the cap and add new DOT 4 brake fluid. Inspect
the cap seal ensuring that it is free of any wear or damage
then reinstall the cap.

Zero Owner's Manual (S and DS).book Page 11 Wednesday, February 28, 2018 11:21 AM

Summary of Contents for DSR 2018



































































































































































Search results

Summary of Contents for DSR 2018

Reviews:

Related manuals for DSR 2018

Brands by name

Popular brands

Zero DSR 2018, Owner'S Manual

Search results

Summary of Contents for DSR 2018

Reviews:

Related manuals for DSR 2018

Brands by name

Popular brands