Zero DSR 2018 Owner'S Manual Download

Page: 102 / 162

General Maintenance

6.28

12 Volt Fuse Center

The 12 volt fuse center is located underneath the seat.

The fuse center (see arrow) has a protective cover that
must first be removed to gain access to the fuses. To
remove the cover, squeeze the tabs together and pull off
the cover.

To access the 12 volt fuse center:

1. Remove two bolts securing the seat to the motorcycle

frame. Refer to Component Fasteners, see

page 6.6

2. Pull the seat rearward to gain access to the fuse center.

3. Squeeze the tabs (A) on the fuse center to remove the

cover.

4. Replace the fuse(s).

The 12-volt fuse values are listed below:

FUSE

RATING

CIRCUITS CONTROLLED

ABS-4 Key

10A

ABS-9 Valve

10A

Headlight

10A

Accessory

10A

Flash Lights, Turn Signals, Horn, Brake/Tail Light

Dash, Running Lights

Zero Owner's Manual (S and DS).book Page 28 Wednesday, February 28, 2018 11:21 AM

Summary of Contents for DSR 2018



































































































































































Search results

Summary of Contents for DSR 2018

Reviews:

Related manuals for DSR 2018

Brands by name

Popular brands

Zero DSR 2018, Owner'S Manual

Search results

Summary of Contents for DSR 2018

Reviews:

Related manuals for DSR 2018

Brands by name

Popular brands