Capture the skies.
™
9_
The LED on the USB charging cable will begin to glow green again
once charging is complete. To keep the battery life as long as possible
avoid removing the battery from the charging cable before charging is
complete. If you have just finished flying your Titan drone, please allow
the battery to cool down for at least 30 minutes before recharging.
• When the Titan battery has finished charging it is advised that
the battery is removed from the charger as soon as possible.
Overcharging will damage the battery and effect the flight time.
• The Titan battery can take up to 90 minutes to fully charge. If the
battery has been on charge for any longer than 2 hours and the
indicator on the charging cable is not showing that the battery is
charged, please remove the battery from the charger.
• When connecting the USB cable with the battery, make sure to
follow the guides on the battery connector as these are designed
to only be inserted in one direction. Forcing the connection in the
incorrect direction, may cause damage to the battery and charging
cable.
• When flying the Titan, low battery will be indicated when the remote
control starts beeping and the lights on the Titan start flashing.
3.1.1 INSTALLING THE FEET
Place the feet on the
underside of the Titan
in the position shown
below. With the feet in
position use the included
screws to secure the feet
in position.
3.1.2 INSTALLING THE TITAN
BATTERY
1.
Slide the fully charged battery into the battery slot on the rear of
the Titan Drone with the battery sticker facing upward.
2.
Make sure the battery clicks into place and is secure.
3.
Hold the power button for two seconds to power up the Titan
drone
