Capture the skies.
™
11_
3.1.5 REMOTE CONTROL
1.
Ensure that the Remote
Control power switch is in
the OFF (down) position.
2.
Remove the battery cover
on the rear of the Remote
Control by sliding it
downward.
3.
Insert 4 x AA batteries (AA
Batteries not included)
making sure that they are in the orientation specified.
4.
Do not mix new and old batteries or different types of batteries.
3.1.6 FLIGHT SAFETY
Before flying your Titan make sure that you are in a safe setting. CASA
restrictions regarding flying drones require the drone be no closer
than5.5kms from any airport or airfield whilst flying. Drones should
also not be flown over populated areas or any closer than 30 metres
from vehicles people or animals.
It is also required that you check your surroundings before taking off
making sure there are no obstacles or dangers in the area, including
overhead power lines and bodies of water. If there are hazards present
in your intended area of flight, please consider an alternative location.
3.1.7 WIFI CONNECTION AND APP SET UP
To use your Apple or Android smart-phone as a FPV screen you will
need to wirelessly connect your smartphone to your Titan over WiFi.
This is done during the set up and launching of the Titan and requires
you to have the Zero-X Titan App installed.
1.
To find the Zero-X Titan App search ‘Zero-X Titan’ on the Apple
App store if you are using an iPhone, or on the Google Play store if
you are using an Android phone.
2.
Download the Zero-X Titan App.
3.
Once the App is downloaded and installed on your Smartphone,
switch on your Titan by holding the power button for two seconds
and move your Smart-phone to be within two metres of the drone.
4.
When the Titan is switched on (without the remote controller
switched on) The lights on the arms of the Titan will flash. While
these lights are flashing the WiFi signal will start up be available for
connection.
5.
In your Smart-phone’s WiFi settings find the and select the ZX
TITAN WiFi connection.
6.
Open the Zero-X Titan App.
7.
Press the App Control button on screen to access FPV mode
