background image

General Maintenance

6.26

Parking and Long Term Storage

It is recommended to always leave the power pack 
plugged in. The Zero FX/FXS charger is designed to 
maintain a balanced and complete charge at all times 
without wasting any electricity.

Over extended periods of time the power pack is 
checked every 72 hours to ensure that the cells are 
balanced and that the power pack is full.

To prolong the life of your power pack you should store 
your motorcycle in a cool area. Storing your motorcycle 
in a hot area will cause your power pack’s life to be 
shortened.

If, for some reason, your motorcycle was not plugged in 
for several days, you should always charge it up before 
riding.

For more information on the power pack and the electrical 
system, see 

page 4.4

.

WARNING!

 Opening of the power pack is for trained Zero 

Motorcycles technicians. Please be aware that incorrect 
handling of a Zero power pack can be dangerous. 

DO 

NOT OPEN!

Zero Motorcycles Accessories

Zero motorcycle accessories are designed to complement 
and function with other systems on your motorcycle. Your 
dealer can accessorize the motorcycle using genuine Zero 
accessories.

A full line of parts, accessories, and apparel can be found 
on the Zero Motorcycles website.

Zero Owner's Manual (FX and FXS).book  Page 26  Monday, December 14, 2015  3:02 PM

Summary of Contents for ZERO FX 2016

















































































































































Reviews: