Zero Motorcycles S 2021, Owner'S Manual

Page: 70 / 160

Power Pack and Charging
5.8
Charge Tank (if equipped)
The Charge Tank is a quick charging accessory. It reduces the
time to fully charge the power pack (compared to the to the
Level 1 existing integrated charger) and is designed to work with
Level 2 public charging stations operating on the popular
J1772/IEC 62196 standard.
Note: For motorcycles with a ZF7.2 battery pack, using the
On-Board charger in conjunction with the Charge Tank is not
supported because it will exceed the max charging rate for the
battery pack. A fault code will display on the dash and the
motorcycle will not charge at the expected rate.
Using the Charge Tank
1. Ensure that the key switch is in the ON position.
2. Open the charging connector protective cover (A).
3. Plug the J1772 charging connector into the Charge Tank
charging receptacle (B). Once connected, charging
automatically starts.
4. The charging icon on the dash flashes as the battery is being
charged. Once charging is complete, the motorcycle will turn
off and the icon will not be illuminated. See
“Warning
Indicator Lights”, on page 3.10 .
5. Once charging has started, turn the key switch to the OFF
position and remove the key.
6. When you’re ready to ride, disconnect the charger and
reinstall the protective cover.
Zero Owner's Manual (S and DS).book Page 8 Monday, September 21, 2020 11:43 AM