Zero Motorcycles MX, Owner'S Manual, Page: 41 / 100

4-12
A B C
Charging The Power Pack
(Installed in Motorcycle)
1. Ensure that the key switch is in the “OFF”
position.
2. When the motorcycle’s energy gauge is on the
second or third bar when not under load, the
power pack needs to be charged. Frequent top
off charging is good for the power pack’s life
span, so do not hesitate to charge frequently.
WARNING: Charge the Zero power pack with the Zero
charger. It is possible for lithium ion cells to overheat
and burst. It is recommended to charge in a location
that is away from combustible materials and in a well
ventilated area. Avoid outdoor charging of your power
pack in the rain.
4. Connect the battery charger to the power pack
connector (A).
3. Disconnect the main power cable connector (C)
and throttle enable cable connector (B).
5. Always connect the charger to a GROUNDED
outlet. When using an extension cord, avoid
excessive voltage drops by using a grounded, 3-
wire, 12-AWG cord no longer than 7.6 m (25 ft).
The charger can be used on 110 V AC or 220 V
AC current. The voltage does not change the
amount of time that the motorcycle takes to
charge.