Zero Motorcycles MX, Owner'S Manual, Page: 35 / 100

4-6
A
B
Add On Electrical Equipment
WARNING: Do not add anything electrical to your
motorcycle unless approved by your CSC. Some
electrical components can damage your motorcycle.
Some add on electrical equipment can keep other
components from working as they should or can
dramatically reduce the range and or life expectancy
of the power pack.
Power Pack Swapping
The X and MX motorcycles feature a quick change
power pack. This allows the rider to charge one
power pack while using another. To change the power
pack, perform the following:
Removal
1. Remove the key from the key switch and safely
support the motorcycle.
2. Locate the knob (A) on the rear of the upper
frame rail and remove.
4. Disconnect the power pack connectors (D) and
(C).
Note: The power pack weighs 20.9 kg
(46 pounds).
5. Using a firm grip, slide the power pack out of the
frame.
3. Pull the frame rail (B) away from the motorcycle,
unhooking it at the front.
The 6-digit serial number for the battery is located on
a label on top of the power pack.