Zepro Z 2500-130, Installation Instructions Manual

Page: 41 / 64

Z 2500-130/150 Connection
41 www.zepro.com
6.2.1 Controller (TLC-B1)
Connection of warning lights and the most commonly occurring controller (CD (Control Device)) models are
shown below. Possible controller models vary depending on lift model, configuration and relevant market.
m
WARNING!
Make sure that the control board is not powered up before connecting. Connecting more than one con-
troller to each connection is not permitted. Risk of physical damage.
WL1 U7 U6 U5 U5 U4 U4 U3 U2 U1 U0
+ +
U0 +
+
U1 U2 U3
WL2
PA+
S5
S1+
S4
S3
S2
S1
S5+
S4+
S3+
S2+
PA-
CS
CS+
Down
2H
Out
Down
Down
C1+
C1+
Up
Tilt
In
C2+
Up
Tilt
C3+
Up
Ctrl 3
Ctrl 2
Ctrl 1
CD4
Up
Tilt
2H
Down
CD9
Up
Tilt
Down
CD10
Up
Down
CD14
Up S Down
Up
Tilt
Down
2H
CD1
CD15
Up
Down
Tilt up
Tilt down
2H
1 2 3
4
CD11
Black C1+
White ( )*
Brown Up
Yellow Down
Blue Tilt
Black C2+
White ( )*
Brown Up
Yellow Down
Blue Tilt
Black C3+
White ( )*
Brown Up
Yellow Down
Black C1+
White ( )
Brown Up
Yellow Down
Blue Tilt
Black C1+
White ( )
Brown Up
Yellow Down
Blue Tilt
Pink 2H
* applies to controllers with heating only
Black C1+
Blue 2H
Black C2+
White ( )
Brown Up
Blue Tilt
Yellow Down
Grey Not used
For connection of foot controller and warning
lights, see electrical diagram in Section
6.2.3
.