26
Roma Groove Use, Care, and Installation Guide
R O M A G R O O V E
WA L L
C O R E
Maintenance
Hood & Filter Cleaning
Surface Maintenance
►
Do not use corrosive detergents, abrasive detergents or oven cleaners.
►
Do not use any product containing chlorine bleach or any product containing chloride.
►
Do not use steel wool or abrasive scrubbing pads which will scratch and damage surface.
Cleaning Stainless Steel
Clean periodically with warm soapy water and clean cotton cloth or micro fiber cloth. Always rub
in the direction of the stainless steel grain. To remove heavier grease build up use a liquid degreaser
detergent.
After cleaning use a non-abrasive stainless steel polish/cleaners, to polish and buff out the stainless
luster and grain. Always scrub lightly, with clean cotton cloth or micro fiber cloth and buff in the
direction of the stainless steel grain.
Baffle Filters
The baffle filters installed by the factory are
intended to filter out residue and grease from
cooking. They need not be replaced on a regular
basis but are required to be kept clean.
Remove and clean by hand or in dishwasher using
a non-phosphate detergent. Discoloration of the
filter may occur if using phosphate detergents, or
as a result of local water conditions - but this will
not affect filter performance. This discoloration is
not covered by the warranty. Spray degreasing
detergent and leave to soak if heavily soiled.
Dry filters and re-install before using hood.
Removing Baffle Filters (FIG. E):
1.
Pull down on filter latch to release filter tabs.
2.
Pull down on front of filter to remove.
FIG. E
